• Provide consistent filtration of fluids in a wide range of applications
  • Constructed from polypropylene meltblown media, these filters retain particles from 0.1 to 50 !Jm
  • High surface area ensures Long service life and Low initial pressure drop
  • All components are made of 100% polypropylene material for use in critical process applications
  • Manufactured and assembled in cleanroom environment to minimize the possibility of contamination
  • Wide range of configurations to tit most commercially available filter housings

Materials Of Construction

Filter Media/Components Polypropylene
Sealing 100% Thermally Welded
Gasket Silicone, Buna, Epdm, Fep/Silicone, Ptfe, Viton®
pp pleated filter cartridge manufacturers Gujarat


Filter Grades (Nominal) 0.1, 0.2, 0.45, 1, 2, 3, 5, 10, 20, 50, 100 Ijm
FDA Listed Materials Manufactured From Materials Which Are Compliant With Us/Fda/21cfr177 Requirements For Polymers
Sterilization Multiple Autoclaving For 30 Min At 121oc Under No End Load Conditions May Be In-Line Sanitized With Hot Water At 82 Oc For 1hour In-Line Steam Sterilization Is Not Recommended
Purity Cartridges Are Free Of Resins, Binders And Adhesives
Outside Diameter 68mm
Lengths 5″, 9.75″, 10″, 19.75″, 20″, 30″ & 40″
Adapters DOE, Code 3, Code 7, Code 6, Code 8


Food and Beverage Clarification in wine, potable water, beer, soft drink, brewery, edible oils
Chemical Industry Adhesives, solvents, surfactants, chemicals
Electronic Industry Etching solution, electroplating
General process industry Pre-filtration for Dl and RO systems, process water